Prime rib roast 1st time

[SuperDave]

I use a little higher cook temp, 225 - 230, and it roughly takes me 45 minutes to 1 hour per pound to reach 130. 

 

[kz0m]

Tony, yes I did. Took my 32 day aged roast, rested it overnight with dalmation rub, garlic, and rosemary then into the #2 with 50/50 mix of oak and mesquite (5 oz total). Smoked at 200 deg until IT was 135 deg. Let it rest for 30 minutes and then into a 500 deg oven for 10 minutes. The result was wonderful. Buttery, tender, juicy, and enjoyed by all!  Your reverse sere method works great!

Bob, that looks great!  Did you use a UMAi bag for aging?

Carl

 

[DivotMaker]

Thanks, Tony.  This seems too easy!  My boneless prime rib weighs about 4.25 lbs, and I tend to like it rare to medium-rare.  How long should I allow for it to reach 125 internal temperature. . .approximately?

Amazingly, it actually is that simple!  You're looking at about 30-40 min/lb at 200, so I'd plan on 2:15 - 2:45 in the smoker...3, tops.  You can double-wrap in foil, to rest, while the searing oven gets hot.  2-3 oz of wood and a water pan.

 

[BedouinBob]

Carl, yes I did. They really work well.

 

[SmokinSusie-Q]

Thanks, Dave
I was going to try last weekend but due to bad weather, I'll have to wait til next weekend.  What kind of wood and how many oz. do you recommend?

 

[MicKM]

Susie-Q, if you like it medium-rare to medium, smoke it at 200 until internal temp is 128-135 (depending on how done you like it.  I find prime rib perfect medium-rare).  Let it rest for 30 minutes, while your oven heats as hot as it will go.  Put your roast on a baking rack in the hot oven for 7-8 minutes to brown the outside; this is called a "reverse sear." 

Check out the link to Christmas prime rib, posted in my first post above.  This explains the low/slow/reverse-sear technique for beef.  Works great!!

Hi Tony
Just a quick question you might help me with. If you do a rib roast, do you want the smoke for more than the first 2 hours? Do you add timber to the smoker as you go, or put in the required amount and just let it go?
I'm trying to get my head in the right space?
Best regards and thanx in advance Mick M

 

[BedouinBob]

Hey Mick, no worries on adding wood. You don't need to! Just put in about 5 or 6 oz of your favorite wood, set 200 deg, close the door, and wait for the desired internal temp. Unbelievably easy!  oh, you probably want a water pan too. 

 

[SuperDave]

Bob,
That's a lot of wood!  Tony says, "2 - 3 oz." and I'm usually in the same range. I've gone as high as 4 oz. and thought it was a bit much.

 

[MicKM]

Thanks for the feed back gents.

I was just looking at purchasing the rib eye, thought I would share with you the Singapore prices!!

 

[DivotMaker]

Wow, Mick!  Those prices are outrageous!!  As far as the wood amount (sorry, I missed your question earlier), I only use around 3 oz on prime rib (give or take an ounce).  Although it's a long smoke, I find that much smoke doesn't overpower the great beef taste, so I don't overdo it. 

 

[BedouinBob]

Yikes! And I thought Colorado meat prices were high!

Dave, I have always gone a little higher on the wood amount. I guess I need to try 3 oz and see what I think!  8)