Well, delivery was delayed 2 days. But it finally arrived, and I excitedly unpacked and got things set up. I have two concerns. The small one, is that the heating element is way off center. But the major concern, is that there is real poor construction on the back, bottom left panel. As you can see, there is a good size gap, even exposing the insulation. I don't like how moisture and mold could maybe get up in there. I have yet to test to see if heat leaks from it. I've emailed and await a response. I'm not sure what to do. I do not like the idea of having to repack this monster, send it back, and wait for another one, and hope everything is perfect on the next one.
Happy and upset, just got new 3D wifi.
- Thread starter Drayken
- Start date
Steve will respond. He always does. Did you send him the photos? I would refrain from using it until you and Steve have the opportunity to discuss it and come to a solution. He can always be reached by phone as well. Repacking and returning it may be a pain but if that is what eventually is decided so be it. The element being off center as it is won't hurt performance. The gap is unsightly. If it were me, I would hammer the gap closed as best as I could and mix up a batch of JB Weld and seal it off. But that is just me. Steve will work with you.
Yep, pics sent. I'll call if I don't hear back from him in a little bit. I had to jump through hoops, to get delivery of this. (No one home, had to pick up at FedEx Depot, borrow truck, etc...) Returning would not be fun. 
Not to mention, my luck of sale ending 2 days before I ordered, then new sale started the day I got delivery...
Not to mention, my luck of sale ending 2 days before I ordered, then new sale started the day I got delivery...
azbohunter
Member
Sounds like you have a gremlin hanging around you that doesn't want you to be a happy smokerDrayken said:Yep, pics sent. I'll call if I don't hear back from him in a little bit. I had to jump through hoops, to get delivery of this. (No one home, had to pick up at FedEx Depot, borrow truck, etc...) Returning would not be fun.
Good luck and I'm sure that when it is all done you'll be enjoying some great meals.
Damn... huge bummer. I don't blame you at all for your concern about that not being sealed. If it were up high on a side joint I'd be less concerned. I don't think it'll be a problem for the insulation properties, but the idea of grease getting in there is pretty yucky.
If it were me in your situation, I'd probably talk to Steve about a meaningful discount and then fix it with JB Weld as someone else suggested. That would safely seal it up and soothe my hurt from getting a not quite perfect smoker.
I don't blame you at all for your concern about that not being sealed. If it were up high on a side joint I'd be less concerned. I don't think it'll be a problem for the insulation properties, but the idea of grease getting in there is pretty yucky.If it were me in your situation, I'd probably talk to Steve about a meaningful discount and then fix it with JB Weld as someone else suggested. That would safely seal it up and soothe my hurt from getting a not quite perfect smoker.
pappabear said:
No way would I hammer the leg. It's spot welded. My luck, I'd break that weld. I'm not gonna do service labor on a new $1,000 item. And like many have said, the customer service here, seems to be great. Steve got back with me, and we're working things out, so hopefully it all goes well.
azbohunter
Member
Drayken said:
Sorry you are having to deal with the hassel but you have to say that is awesome customer service.
That's good to hear... I think you're the second person recently to not be completely thrilled with what they received. I hope this are both isolated incidents. If it's happening more to establish a pattern he may have to have a talk with his manufacturer and/or establish some kind of pre-check before shipping them out. I'm sure he'll figure it out as it will get expensive (both money and reputation) if there is a quality control issue.
Still feel bad for you... sucks to not get to break in your baby and it sounds like it wasn't easy to get the first one.
Here's hoping you get one in perfect condition this time around and that you fall in love with it as so many of us have ours.
Stevegardner
New member
I hate reading this, close to pulling the trigger on one. I have to agree, I would never consider taking a hammer to a brand new smoker. The customer service seems very impressive, quality control might need work.
.Love the camo promo cover.Good to see the great customer service.Fingers crossed the replacement arrives perfect. I would have been better off with a full return and repurchase, since he had a promo. But I didn't want to squabble over those things, since he let me sit on the current smoker, till I receive the replacement, before I have to send this one out.
