Auber for #3

[es1025]

Ok,
I received the Auber for the #3 today.  I used Ben's instructions from the Smokin-it web site.

Once I plug everything in and set the smoker temperature/duration and IT temperature how do I know the auber is working.  I read the instructions twice but what to ensure I do everything correctly.  The smoker probe will not be fixed and the controller is not bypassed.

 

[DivotMaker]

Congrats, Ed!  You know the Auber is working if you see the little green light on the right side of the display lit.  It will pulse from bright to dim, or off, depending on how much current it is sending to the element.  When the Auber is on, you'll also know it's working if the smoker heats up.   Just make sure your dial is set to 250, or the on board controller and Auber will have a death match for control of the smoker!

 

[DivotMaker]

Also, I highly recommend doing an autotune.  I wrote instructions for this, and they're posted on Smokin-It.com under the Instructions section.  You can download it from there in pdf.